News: 34R product news. ROTO Hubs & Hubguards

2012/12/5 6:10:00 (1503 reads)
The long awaited 34R ROTO hubs are in stock right now! The Hub shells are designed by our team and all ideas comes from real riding bmx. Due to 34R team riders request we use high quality hollow axles from hardened Cr-Mo. We produce rear hubs in RHD and LHD version only with 36 holes. We use high quality sealed bearings. Hubs are made in best hub factory in Taiwan. Both hubs are sealed against dust and dirt for example for dirt riding.

34R ROTO hub front
The biggest advantage are CNC AL nuts7075 - for 17mm wrench as is used at back hub so you need only one tool. Hub body was designed together with hub guard, which is available separately.

Guard for front hub is with thread and is used as change for cone. For better assembling and service hub we use 10mm 100% Cr-Mo hardened axles with allen key from side. As you can see hubs are in all our 34R colors.

34R ROTO hub rear
We manufacture hubs for LHD and RHD, 9T driver with bushing polymer bearing for long life without service. 14mm 100% Cr-Mo hardened hollow axle with allen key from both side for easier service and guard fitting. Hubs are manufactured in such a way that the customer did not have chance to look inside hub without good quality tools. Professional service can buy from us special key for loosing cone. 34R Team riders required louder noise. Hub factory make special for us stronger spring which tightens pawls more and hub is louder.

34R ROTO Guard
Made from quality Al 7075 T6 stronger material for street riding. We focused to unite hub, guard and peg design. It makes compact design and all is in one line and nothing resist to grinding. Both guards are with thread because hub width is same when you swith guard for cone (not as like with slip guard when hub is wider and sometimes is hard to put wheel into frame or fork) Rear guard has allen bolt from side for fixing as cone. Front guard has 2 holes for tight.

Packaging 34R
The 34R graphic team put a lot of time and effort into quality packaging of the 34R products. Completely designed boxes for hubs are clean to show to the customers that this is high quality product from our brand. First look sells well :).

For more information on these products and lots more, contact:

www.34R.cz











Product pics by 34R
Sponsors
Social media

FAT BMX RSS FeedFAT BMX Facebook PageFAT BMX Twitter PageFAT BMX on Instagram

Media partners
Upcoming events
Currently online
46 user(s) are online (35 user(s) are browsing News)